RPI-COOLKIT - Raspberry pi Heatsink cooling kit
As we know, the Raspberry Foundation offered the possibility to maximize the performances of Raspberry-PI Rev. 2 by providing a 512M-RAM and by overclocking up to 1GhZ without affecting the warranty: http://www.raspberrypi.org/archives/2008
This inevitably leads to a substantial increase of the temperature of the main components and a consequent reduction in lifetime of the board.To overcame this problem, TEKO has developed a cooling kit which allow to reduce the temperature. The kit consists of three heat sinks to apply directly on the SOC (BMC2835), on the USB/Ethernet (LAN 9512) and on the regulator voltage by means of the 3M thermal adhesive included in the kit.
The tests we did with thermal chamber by playing the QUAKE-3 DEMO , show a strong reduction of the temperature up to 12°C.
Without RPI-COOLKIT | With RPI-COOLKIT | |
The benefits of using our KIT:
- easy assembling assured by the 3M adhesive tape
- extremely low profile to an easy access to GPIO
- compatible with Raspberry PI Rev-1 and Rev-2
- no noisy funs
- extension of life of your Raspberry PI
-
reduction of failure risk